0 Items - $0.00 My account / Register

KegLand

Home / Brands / KegLand

KegLand Duotight In-Line Regulator with Gauge

Duotight In-Line Regulator with Gauge

Duotight In-Line Regulator with Gauge

$19.49

KegLand Oxebar Mono PET Keg - 8 L / 2.2 Gal

Oxebar Mono PET Keg - 8 L / 2.2 Gal

Oxebar Mono PET Keg - 8 L / 2.2 Gal

$15.49

KegLand Mini Keg | Ball Lock Tapping Head

Force carbonate and serve from your KegLand Mini Keg with the Ball Lock Tapping Head. The Tapping Head features Gas-In and Bev-Out keg posts and PRV rated to 35 PSI

Mini Keg | Ball Lock Tapping Head

$39.99

Force carbonate and serve from your Mini Keg with the Low Profile Ball Lock Tapping Head. The Low Profile adds about 1.5" to the height of the keg, making it the ideal dispensing solution if you need to fit your keg into a cooler or compact refrigerator

Mini Keg | Low Profile Ball Lock Tapping Head

$34.99

KegLand Wort Whipper Super Compact Magnetic Stir Plate

Without a stir plate you'll need to pick up and swirl your starter by hand as often as possible. The stir plate is a simple solution that will continuously aerate your starter, leading to higher numbers of viable yeast.

Wort Whipper Super Compact Magnetic Stir Plate

$43.99

KegLand KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | High Temp Plastic | 5 GPM | 25 Watt

KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | High Temp Plastic | 5 GPM | 25 Watt

KegLand MKII Magnetic Drive Pump | Center Inlet Pump Head | High Temp Plastic | 5 GPM | 25 Watt

$88.00

KegLand KegLand | Gas Board for Duotight In-Line Regulators | 4 Output

Keep your draft system dialed in with this regulator gas board for Duotight In-Line Regulators. The gas board can hold up to six regulators, allowing you to monitor and adjust the pressure going to each keg.

KegLand | Gas Board for Duotight In-Line Regulators | 4 Output

$15.99

KegLand BrewZilla All Grain Brewing System | Gen 4| 35L | 9.25G | 220V

BrewZilla All Grain Brewing System | Gen 4 | Integrated Pump | Includes Wort Chiller | WiFi | Bluetooth | RAPT | 35L | 9.25G | 220V

BrewZilla All Grain Brewing System | Gen 4| 35L | 9.25G | 220V

$599.99

KegLand Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug

Duotight Push-In Fitting - 9.5 mm (3/8 in.) Plug

$1.59

KegLand Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow

Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow

Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow

$2.19

KegLand Duotight Push-In Fitting - 8 mm (5/16 in.) Plug

Duotight Push-In Fitting - 8 mm (5/16 in.) Plug

Duotight Push-In Fitting - 8 mm (5/16 in.) Plug

$1.69

KegLand Draft Tower Fan Kit

Draft Tower Cooler Kit

Draft Tower Fan Kit

$32.99

KegLand Corny Keg - 2.5 Gallon Ball Lock Keg

New corny cornelius keg ball lock 2.5 gallons

Corny Keg - 2.5 Gallon Ball Lock Keg

$109.99

KegLand NukaTap® S/S Beer Faucet | Matte Black Finish | Stealth Bomber Edition |

The NukaTap Stealth Bomber beer faucet features a forward sealing design. In normal rear-sealing faucets the entire faucet has to drain of beer. In forward-sealing faucets the faucet keeps beer in it.

NukaTap® S/S Beer Faucet | Matte Black Finish | Stealth Bomber Edition |

$42.99

KegLand Oxebar Mono PET Keg | 1 Gal.

This 1-gallon keg is lightweight, compact and has high oxygen barrier properties with 3x better gas transmission than traditional PET grades of plastic making it suitable for beer storage or other oxygen sensitive carbonated and non-carbonated beverages.

Oxebar Mono PET Keg | 1 Gal.

$12.49

KegLand Step Drill Bit

Suitable for drilling holes in plastic, wood, stainless steel, and other metals. You can use this drill bit to install valves or bulkheads on a stainless kettle, bore out a hole for a draft shank, or drill out the pilot hole found on many drip trays.

$10.99

KegLand Kegland CO2 Cartridge - 74 g

These cartridges give the oomph to your mini-regulator dispensing unit! Perfect for dispensing your beer on the go. One canister will push between 1-4 Cornelius kegs, depending on how it is used and the CO2 consumption required.

Kegland CO2 Cartridge - 74 g

$12.99

KegLand Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

Duotight Push-In Fitting - 8 mm (5/16 in.) Tee

$3.29

KegLand Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

Duotight Push-In Fitting - 8 mm (5/16 in.) Joiner

$2.79

KegLand Temp Twister Cooling Coil

The Temp Twister Cooling Coil is the ideal option for maintaining fermentation temperatures in any model FermZilla. Use an IceMaster Glycol Chiller or ice bath with submersible pump to push coolant through the coil when temps get too hot.

Temp Twister Cooling Coil

$43.99

KegLand FermZilla Flat Twister Lid

The Flat Twister Lid comes with 3 pre-drilled holes perfectly sized for the Duotight bulkheads that come with the Temp Twister Cooling Coil and FermZilla Thermowell. Lid o-ring included.

FermZilla Flat Twister Lid

$10.99

KegLand Floating Dip Tube Filter Attachment

Made from HDPE and 304 Grade stainless steel, this product can be boiled or sanitized in the full range of cleaners that we sell. The plastic HDPE is over molded onto the stainless mesh to make a seamless finish. The end cap can easily pop off for cleanin

Floating Dip Tube Filter Attachment

$3.99

KegLand Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer

Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer

Duotight Push-In Fitting - 6.35 mm (1/4 in.) x 9.5 mm (3/8 in.) Reducer

$3.99

KegLand Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

Duotight Push-In Fitting - 8 mm (5/16 in.) Ball Valve

$3.49